SKILL SPECIFICAITONS

Power：190V~240V/50HZ (90V~260V The power can order)
Lamp：
  PHILIPS:    MSI 1200 (color temp)：5600k    
                   MSI 1200W/S (color temp)：6000k
  OSRAM:    HMI1200W/S XS (color temp)：6000k     
                    HMI1200W/GS (color temp)：6000k
All power Consumption：1400W
Control Single： DMX 512    
Control Channels：18(16 bit)，16(8 bit)
Single Flycase Size（LxWxH）: 630X475X970 (mm)
Single Carton Size（LxWxH）: 585X480X 840(mm)
N.W:49KG
G.W:54KG
Motors:15

PERFORMANCE TRAIT :
@ Control panel can control on/off of light (Need to order to do)
@ Control panel can independently control motor debugging, debug reset
@ Control panel can control light DMX address display stand, upside down, and DMX signal indicator light on/off
@ Aperture size adjustable (shooting beam size can be adjusted according to field programming)
@ 8 kinds of primary color, simultaneous rapid single way rolling effect
@ 0-100% mechanical linear light dimming (ranging from full blanking to full open)
@ 1-10 times/s ultra high speed strobe tuning effect
@ Scanning range of horizontal 540 degree and vertical 250 degree, smooth and free movement, accurate positioning
@ Horizontal, vertical movement position can be accurately adjusted
@ Horizontal, vertical movement speed tunable
@ Each channel has light chopping function (can be used for special effect of spot projection)
@ Light chopping when effect wheel turns and moves (to edit special effect of spot projection)
@ 6 types of fine still patterns (5 types of still patterns + white light)
@ 5 types of fine rotating gobos (can be custom made)
@ Rotating patterns can be freely adjusted forward or reverse, fast or slow
@ Rotating patterns can be separately adjusted (to ensure consistency of pattern direction and angle)
@ Electronic automatic focusing, gobos distance and resolution can be freely adjusted
@ Double magnifiers and raise or lower color temperature
@ Effect of Triangular prism, comet lens and ghost prism, with prism rotating and atomization magnifier effect.
@ Six fans to cool down, cool air blows from lamp holder to bulb heating capsule, so that all components of lamp holder remain at lower temperatures, and service life can be extended, and heat from bulb can be discharged directly in time, so as to ensure all lamp body in temperature range as designed, built-in overheat protection, adequate and good heat diffusion.
@ PFC power factor compensation, even work under voltage fluctuation (±10V)
@ Built-in overheat protection, triggered high voltage protection
@ Compliant with all safety standards, IP20 protection class, power cable to CE20/22 standard
@ Fast and easy installation, one group of one quarter turn locks, tight and safe (based on actual configuration)