SKILL SPECIFICAITONS

Power：190V~240V/50HZ (90V~260V The power can order)
Lamp：
  PHILIPS: MSI575 (color temp)：5600k
  OSRAM: HMI575W/GS (color temp)：6000k
All Power Consumption:800W
Control Signal: DMX 512
Control Channels:18(16 bit), 12(8 bit)
Single Flycase Size（LxWxH）: 580X470X 950 (mm)
Upside down size（LxWxH）: 825*585*933(mm)
Single Carton Size（LxWxH）: 510X506X 758(mm)
N.W:38.5KG
G.W:45KG
Motors:15

PERFORMANCE TRAIT :
@ Control panel can control on/off of light (Need to order to do)
@ Control panel can independently control motor debugging, debug reset
@ Control panel can control light DMX address display stand, upside down, and DMX signal indicator light on/off
@ Aperture size adjustable (shooting beam size can be adjusted according to field programming)
@ 8 kinds of primary color + 6 kinds of mixed color, simultaneous rapid single way rolling effect
@ 0-100% mechanical linear light dimming (ranging from full blanking to full open)
@ 1-10times/s ultra high speed strobe tuning effect
@ Scanning range of horizontal 540 degree and vertical 250 degree, smooth and free movement, accurate positioning
@ Horizontal, vertical movement position can be accurately adjusted
@ Horizontal, vertical movement speed tunable
@ Each channel has light chopping function (can be used for special effect of spot projection)
@ Rise and lower color temperature, orange and atomized effect
@ 6 types of fine still patterns (5 types of still patterns + white light)
@ 5 types of fine revolving gobos (can be custom made)
@ Revolving gobos can be freely adjusted forward or reverse, fast or slow
@ Revolving patterns can be separately adjusted (to ensure consistency of gobos direction and angle)
@ Electronic automatic focusing, gobos distance and resolution can be freely adjusted
@ Triangular prism (replaceable) and prism can freely revolve forward or reverse
@ Three fans to cool down, cool air blows from lamp holder to bulb heating capsule, so that all components of lamp holder remain at lower temperatures, and service life can be extended, and heat from bulb can be discharged directly in time, so as to ensure all lamp body in temperature range as designed, built-in overheat protection, adequate and good heat diffusion.
@ Built-in overheat protection, triggered high voltage protection
@ PFC power factor compensation, even work under voltage fluctuation (±10V)
@ Compliant with all safety standards, IP20 protection class, power cable to CE20/22 standard
@ Fast and easy installation, one group of one quarter turn locks, tight and safe (based on actual configuration)