SKILL SPECIFICATION

Voltage:198V-250V/50Hz-60Hz
Ballast：Electronic
Lamp：
OSRAM: HTI 1500W/D7/60(color temp): 6000K
PHILIPS: MSR GOLD 1500SA/DE(color temp): 6000K
MSR GOLD 1500SA/2 DE(color temp): 7500K
All Power Consumption:1800W
Signal:DMX 512
Channel: 17
Single Flycase Stand Size（LxWxH）：580 x 472 x 1052 (mm)
Upside Down Single Flycase Size（LxWxH）：693 x 556 x 953 (mm)
Body Size: 515 x 406 x 851 (mm)
N.W:46KG
G.W:73KG(With Single Stand Flycase)

PERFORMANCE TRAIT:
@ Console can control on/off of the lamp
@ Console can control the motor debugging and auto-debug reset independently
@ Console can control the lamp by DMX addressing to display stand , upside down and DMX signal indicator's on/off
@ 1-7 times/s ultra rapidly strobe adjusting effect
@ Scanning range of 540°horizontally and 250°vertically, free and smooth movement, accurate positioning
@ Horizontal ,vertical movement position and speed can be accurately adjusted
@ Each channel has chopping function(can be used for special effect of editing located projection)
@ C , M, Y , CTO color mixing effect ,rich colors .
@ C, M, Y, CTO color switch speed can be adjustable (can adjust different colors automatically )
@ fans to cool down, cool air blows from lamp's holding to lamp's heating capsule ,so that all parts of lamp holder can maintain in a lower temperature environment ,and lifespan can be prolonged , heat can be discharged in time ,so as to ensure that temperature of lamp's body not exceed the range which designed ,built-in overheat protection , heat diffusion adequately
@ It has the intellective tracking and power- economized system technique which can reduce the bulb's power timely .when the state of the shutter or the dimming is closed ,then the power of the bulb will reduce automatically 50%,(from 1700W to 750W ), the rated power control will not effected by the fluctuation of the power or frequency . the flash of the bulb can be eliminated, the lifespan can be prolonged .
@ Adopting motor drive , photoelectric and mechanical position ,ensure the position accurately ,no shaking ,the toughness of the belt is good, resisting friction ,less noise ,strong power ,scanning and position accurately and smoothly , high voltage cable and low voltage cable run separately ,ensure the circuit not be interfere .
@ PFC power factor compensation ,work even under voltage fluctuation(±10V)
@ Compatible with all safety standards,IP20 protection grade , power cable accords to the CE20/22 standard
@ Electronic ballast can reduce lamp's weight at least 7 kg (depend on the actual configuration )
@ Fast and easy to install, one set of one quarter turning lock, tight and safe (depend on the actual configuration )